| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 12months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Intercooler for 525d 530d 535d E60 E61 635d E63 E64 Cooling System
| item: | Intercooler for 525d 530d 535d E60 E61 635d E63 E64 Cooling System | |
| Application: |
for 525d 2004-2010 E60 and E61 for 530d 2003-2010 E60 and E61 for 2004-2010 E60 and E63 for 635d 2006-2010 E63 and E64 |
|
| Details | We have engineered these intercoolers using a bar and plate core matched to our flowed cast end tanks, the same as we use on all of our other intercoolers. This is the most efficient way to keep the intake temperatures low.
We have tested our intercoolers on a few vehicles and found they have absolutely fantastic results. They compared to the standard intercooler are reduced massively which means you get consistent increased performance. The standard intercooler and our intercooler both had intercooler intake temperatures of between 115-118 degrees through 5 runs in winter. At the other side of the intercooler into the engine the standard intercooler temps were between 52-54 degrees whereas the MTC intercooler temperatures were between 16-18 degrees over 5 runs. The intercooler features a massive competition core with flowed cast end tanks and 6 extra rows at the front to increase the surface area |
|
| Note | The intercooler is a direct fit and there are some great videos on YouTube to follow. However, professional installation is recommended and should take approximately 1-2 hours. | |
1. Condition: Brand New
2. Core: High strength, high heat conductivity, high safety coefficient.
3.Test: Air tightness test and pressure text.
4. We can put your logo on the product
High effiency and high fiow are the characteristics we have worked hard to obtain.Highly polished end tank ensure the best heat reflection and appearance.
We have following intercoolers.We are also welcome your own design.pls feel free to contact us if you have any other questions.
| Item NO. | Application | Core Size | IN/OUTLET (INCH) |
| ZX-5001 | Uniersal Type | 600x300x76 | 3/2.5 |
| ZX-5002 | Uniersal Type | 600x300x100 | 3 |
| ZX-5003 | Uniersal Type | 550x140x65 | 2.25/2.5 |
| ZX-5004 | Uniersal Type | 550x180x65 | 2.25/2.5 |
| ZX-5005 | Uniersal Type | 280x300x76 | 3/2.5 |
| ZX-5006 | Uniersal Type | 550x230x65 | 2.25/2.5 |
| ZX-5007 | Uniersal Type | 450x300x76 | 3/2.5 |
| ZX-5011 | Honda Civic Fmic | 460x160x90 | 2.5 |
| ZX-5012 | 510x195x110 | 3 | |
| ZX-5015 | Toyota MR2 IC | 240x195x100 | 2.5 |
| ZX-5016 | 600x280x70 | 2.5 | |
| ZX-5018 | Nissan R32/R33/R34 GTR IC | 600*295*110 | 3 |
| ZX-5022 | Mitsubishi DSM 2ND GEN IC 95-99 | 700x260x90 | 2.5 |
| ZX-5024 | Mitsubishi EVO VIII IC 2003+ | 500x315x90 | 2.5 |
| ZX-5031 | Subaru WRX FMIC | 650x235x90 | 2.5 |
| ZX-5032 | Subaru WRX TM IC | 510x195x110 | |
| Uniersal Type | 330x230x65 | 2.25/2.5 | |
| Uniersal Type | 450x180x65 | 2.25/2.5 | |
| Uniersal Type | 450x230x65 | 2.25/2.5 | |
| Uniersal Type | 450x230x65 | 2.25/2.5 | |
| Uniersal Type | 470x300x65 | 2.5 | |
| Uniersal Type | 500x300x65 | 2.5 | |
| Uniersal Type | 510x230x65 | 2.25/2.5 | |
| Uniersal Type | 600x300x90 | 3 | |
| Uniersal Type | 600x300x110 | 4 | |
| Uniersal Type | 510x300x76 | 3/2.5 | |
| Uniersal Type | 410x230x65 | 2.25/2.5 | |
| Uniersal Type | 330x230x65 | 2.25/2.5 | |
| Uniersal Type | 330x155x65 | 2.25/2.5 | |
| Uniersal Type | 450x230x65 | 2.25/2.5 | |
| Uniersal Type | 600x300x65 | 2.5 | |
| Uniersal Type | 510x300x65 | 2.5 | |
| Uniersal Type | 470x300x65 | 2.5 |
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
){kind=link}